SS7 - ITU/ANSI ISUP

Back

Click the following links to download manuals for or links to the configuration of the following hardware: These manuals have detail on how to configure the physical spans and setup SS7 links

    a) Audiocodes Mediant 3000
            http://www.sky-networks.com/mediawiki/images/1/11/Pdf_icon_32.png M3K EMS Manual http://www.sky-networks.com/mediawiki/images/d/da/Info_circle.png
            http://www.sky-networks.com/mediawiki/images/1/11/Pdf_icon_32.png M3K MGCP/MEGACO Manual http://www.sky-networks.com/mediawiki/images/d/da/Info_circle.png
            http://www.sky-networks.com/mediawiki/images/1/11/Pdf_icon_32.png M3K MGCP/MEGACO Product Reference Manual http://www.sky-networks.com/mediawiki/images/d/da/Info_circle.png
    b) Audiocodes Mediant 8000
            http://www.sky-networks.com/mediawiki/images/1/11/Pdf_icon_32.png M8K Programmers User Manual http://www.sky-networks.com/mediawiki/images/d/da/Info_circle.png

4. To configure SS7 for Audiocodes gateways, there are several steps:

1. Physical layer configuration of the links and voice channels on the gateway  is done via the  Audiocodes element management system (EMS) or the Web GUI (M3K only).
2. Next the E1/T1 originating point code, links,  linksets and  routes must be configured via the EMS or Web GUI.
3. Then the originating point code, links,  linksets and  routes setup must be duplicated using the Sky Dance GUI.  This will allow Sky Dance to control the gateway using M3UA and MGCP. 
4. Resource groups for the voice circuits must be created in the Sky Dance GUI.
5. Finally the voice circuits must be configured and assigned to the resource group(s) just created. 

Backend configuration of the Sky Dance Sangoma based SS7 GW is discussed in detail at the following links:

    c) Sangoma SS7 configuration
    d) SS7 Command line commands for Sky Dance Sangoma based SS7 GW