SS7 - ITU/ANSI ISUP

Click the following links to download manuals for or links to the configuration of the following hardware: These manuals have detail on how to configure the physical spans and setup SS7 links

    a) Audiocodes Mediant 3000
            http://www.sky-networks.com/mediawiki/images/1/11/Pdf_icon_32.png M3K EMS Manual http://www.sky-networks.com/mediawiki/images/d/da/Info_circle.png
            http://www.sky-networks.com/mediawiki/images/1/11/Pdf_icon_32.png M3K MGCP/MEGACO Manual http://www.sky-networks.com/mediawiki/images/d/da/Info_circle.png
            http://www.sky-networks.com/mediawiki/images/1/11/Pdf_icon_32.png M3K MGCP/MEGACO Product Reference Manual http://www.sky-networks.com/mediawiki/images/d/da/Info_circle.png
    b) Audiocodes Mediant 8000
            http://www.sky-networks.com/mediawiki/images/1/11/Pdf_icon_32.png M8K Programmers User Manual http://www.sky-networks.com/mediawiki/images/d/da/Info_circle.png

To configure SS7 for Audiocodes gateways, there are several steps:

1. Physical layer configuration of the links and voice channels on the gateway  is done via the  Audiocodes element management system (EMS) or the Web GUI (M3K only).
2. Setting up the E1/T1 originating point code, links, linksets and routes must be also done via the EMS or Web GUI.
3. Next the links, linksets and routes must also be setup on the Sky Dance GUI.  This will allow Sky Dance to control the gateway using M3UA and MGCP.  

Backend configuration of the Sky Dance Sangoma based SS7 GW is discussed in detail at the following links:

    c) Sangoma SS7 configuration - http://wiki.sangoma.com/wanpipe-api-freetdm-mtp2api-configuration
    d) SS7 Command line commands for Sky Dance Sangoma based SS7 GW