SS7 - ITU/ANSI ISUP

Click the following links to download manuals for or links to the configuration of the following hardware: These manuals have detail on how to configure the physical spans and setup SS7 links

    a) Audiocodes Mediant 3000
            http://www.sky-networks.com/mediawiki/images/1/11/Pdf_icon_32.png M3K EMS Manual http://www.sky-networks.com/mediawiki/images/d/da/Info_circle.png
            http://www.sky-networks.com/mediawiki/images/1/11/Pdf_icon_32.png M3K MGCP/MEGACO Manual http://www.sky-networks.com/mediawiki/images/d/da/Info_circle.png
            http://www.sky-networks.com/mediawiki/images/1/11/Pdf_icon_32.png M3K MGCP/MEGACO Product Reference Manual http://www.sky-networks.com/mediawiki/images/d/da/Info_circle.png
    b) Audiocodes Mediant 8000
            http://www.sky-networks.com/mediawiki/images/1/11/Pdf_icon_32.png M8K Programmers User Manual http://www.sky-networks.com/mediawiki/images/d/da/Info_circle.png

To configure SS7 for Audiocodes gateways, there are several steps:

1. Physical layer configuration of the links and voice channels on the gateway  is done via the  Audiocodes element management system (EMS) or the Web GUI (M3K only).
2. Setting up the E1/T1 originating point code, links, linksets and routes must be also done via the EMS or Web GUI.
3. Next the links, linksets and routes must also be setup on the Sky Dance GUI.  This will allow Sky Dance to control the gateway using M3UA and MGCP.  

    c) Sangoma SS7 configuration - http://wiki.sangoma.com/wanpipe-api-freetdm-mtp2api-configuration

Sangoma SS7 CLI usage: (available from the command line interface)

ftmod_sangoma_ss7 general control:

• ftdm ss7 set ftrace X Y
• ftdm ss7 set mtrace X Y

ftmod_sangoma_ss7 signaling information

• ftdm ss7 show
• ftdm ss7 show status mtp2 X
• ftdm ss7 show status mtp3 X
• ftdm ss7 show status linkset X

ftmod_sangoma_ss7 circuit information

• ftdm ss7 show span all
• ftdm ss7 show span X
• ftdm ss7 show status span X chan Y
• ftdm ss7 show free span X chan Y
• ftdm ss7 show blocks span X chan Y
• ftdm ss7 show inuse span X chan Y
• ftdm ss7 show inreset span X chan Y

ftmod_sangoma_ss7 circuit control

• ftdm ss7 blo span X chan Y
• ftdm ss7 ubl span X chan Y
• ftdm ss7 rsc span X chan Y
• ftdm ss7 grs span X chan Y range Z
• ftdm ss7 cgb span X chan Y range Z
• ftdm ss7 cgu span X chan Y range Z

ftmod_sangoma_ss7 link control:

• ftdm ss7 activate link X
• ftdm ss7 deactivate link X
• ftdm ss7 activate linkset X
• ftdm ss7 deactivate linkset X
• ftdm ss7 lpo link X
• ftdm ss7 lpr link X

ftmod_sangoma_ss7 Relay status:

• ftdm ss7 show status relay X
• ftdm ss7 show relay X
• ftdm ss7 show relay

ftmod_sangoma_ss7 M2UA :

• ftdm ss7 xmlshow sctp
• ftdm ss7 xmlshow sctp <sctp_interface_name>
• ftdm ss7 xmlshow m2ua
• ftdm ss7 xmlshow m2ua <m2ua_interface_name>
• ftdm ss7 xmlshow m2ua <m2ua_interface_name> peerstatus
• ftdm ss7 xmlshow m2ua <m2ua_interface_name> clusterstatus
• ftdm ss7 xmlshow nif
• ftdm ss7 xmlshow nif <nif_interface_name>

• ftmod_sangoma_ss7 M2UA logging:
• ftdm ss7 m2ua logging [enable|disable]