Physical layer configuration

From Sky Networks Wiki

Revision as of 16:43, 21 January 2014 by Admin (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Back

Depending on the type of connection their are one or more parts to physical layer configuration:

1. Decide on the physical connections that will be used for voice connections.

   The following are supported:
   a) E1/T1
   b) IP

 then

2.  Configure the spans

If you have SS7 you will also have to

1.  Configure the originating point code
2.  Configure the links
3.  Configure the linksets
4.  Configure the routes

Retrieved from "https://sky-networks.com/mediawiki/index.php?title=Physical_layer_configuration&oldid=604"